Introducing the FY-90Q Dream Flyer Quad Combination Gyro/Self Leveling Stabilizer System.
Works both in X-Mode and + (plus) Mode.
Firmware-upgradeable
DOWNLOAD FY90Q MANUAL: FY90QMANUAL.PDF
Download FY90Q Sticker Advisory (Only for modules with the old sticker.): FY90QStickerAd.PDF
Download FY90Q PID-SETTING via a standard TTL-USB CABLE (sold separately here): CLICK HERE TO DOWNLOAD PID PROGRAM
Check out the latest from FYTECH FY90Q PARAMETER SETTING SOFTWARE
Updated Setting Parameters courtesy of to Bob Valley, fgene, Jesolins and everyone that has helped us get this far (thank you!):
___________________________________________________________
Package content:
• 1 x FY90Q
• 1 x RC receiver connecting wires;
• 2 x Velcro double sided tape
• 1 x vibration absorbing mount;
________________________________________________________
RED & BLUE LED Flash Indicator:
Gyro reset:
One arm tied with 500 ml water bottle:
Video from Patrick:
FY-90Q Comparison from Patrick Lupo on Vimeo.
Learning to fly the Quad with FY90Q:
First use as Aerial Videography Quad:
The raw On-board footage:
After video processing (Smoothcam)
Quad with FY90Q carries an 800 gram Canon:
First "Flying Around" video in the USA by Patrick Lupo:
Quadcopter with FY-90Q - Just Flying Around from Patrick Lupo on Vimeo.
Indoor Test with Ground Effect
Up the staircase
Radio setting adjustments done for yaw control and forward flight:
This product was added to our catalog on Tuesday 16 August, 2011.
