GWS BRUSHLESS ESC PROGRAMMING CARD
[GWPGM001]

GWS Brushless ESC Programming Card

Weight:25g (0.89oz)

63mmx38.1mmx12mm

Flyers can carry this small & compact programming board to the flying fields and change the setting on the GWS Brushless Speed Controllers without a PC. The functions flyers can change are as below:

1. Battery Cutoff Voltage: Ni-MH 6~16 Cells/Li-PO 2~4 Cells.

2. Brake Setting: No Brake/Soft Brake/Moderate Brake/Hard Brake.

3. Responding Delay Time to Throttle: 0.15/0.3/0.7/1.0 Sec.

4. Switching Frequency: 8 KHz/16 KHz/32 KHz/none.
5. Timing Advance: auto/5 degree/12 degree/18 degree/25 degree.