T-REX 600 NITRO LIMITED EDITION
[KX0160NPL]

Features:

• 1.Bump resistance fiberglass prepainted canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.
• 2.Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.
• 3.+-14° collective pitch is possible for extreme 3D performance.
• 4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
• 5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
• 6.Pitch and All servos moved forward for CG.
• 7.Battery tray designed for easy and clean radio gear installation.
• 8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
• 9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
• 10.Heavy duty tail with thrust bearings.
• 11.95mm Tail Blades.
• 13.Rigid frame design that can also handle hard crashes without damage.
• 14.G-10 3K Fiber frames, fins and boom supports.
• 15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.
• 16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
• 17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs).
• 18.Fuel Tank designed so that no additional header tank is required.
• 19.New main gear with one-way bearing design for high torque.
• 20.New flybar paddles feature light weight and sports.
• 21.New flybar control set design.
• 22.New tail boom supports.

Specifications:

• Length:1160mm
• Height:410mm
• Main blade length:600mm
• Main rotor diameter:1350mm
• Tail rotor diameter:240mm
• Engine pinion gear:20T
• Autorotation tail drive gear:180T
• Drive gear ratio:8.5:1:4.5(E:M:T)
• Flying weight:Approx. 3200g
• Color carton:72x25.7x12.5cm
• Outer carton:74.5x52.5x39.5cm ,6sets/ctn

Accessories:

• T-REX 600 Nitro kits setX1 set
• 600D Carbon fiber bladeX1
• DS610 Digital servoX3
• GP780 Head lock gyro comboX1
• 2 In 1 voltage regulator comboX1
• RCE-G600 GovernorX1

Radio transmitter and electronic equipment required for assembly::

• Transmitter(7-channel or more, helicopter system)
• Receiver(7-channel or more)
• Standard servoX1
• Align 50 engineX1
• 50 MufflerX1
• Pitch gaugeX1
• Super starterX1
• Engine fuelX1
• Fuel pumpX1